WORLD-CCTV 722RIII-IP, User Manual, Page: 93 / 95

Page 93 of 95
1. The cursor presents the current input position of the label letter. Upon
the letter be selected, the cursor move to left.
2. Using the “ UP ” , “ DOWN ” , “ RIGHT ” , “ LEFT ” of the joystick, the right letter can be selected from
alphabet. After selection of the correct letter, input “ FOCUS+ ” .
3. After all letters be set, move joystick to “ OK ” then input “ FOCUS+ ” to save the modification. If you
want to cancel the setup of label, just move joystick to “ CANCEL ” then input “ FOCUS+ ” to cancel.
17. Swing Setup
SWING NUMBER: 1/5: This P/TZ camera supports up to 5 pieces swing scan. This item is used to set the
series number of swings.
L POSITION: PRE 001: The 001 preset point be set at the left side of swing;
R POSITION: PRE 002: The 002 preset point be set at the right side of swing;
SWING SPEED: AUTO: The speed dome swing. AUTO is default of system;
LOOP: 1: The times of swing turning (be used for GROUP function only)
DIRECTION: AUTO: The direction of swing turning;
RUN SWING: To run swing.
18. Pattern Setup
PATTERN SETUP: To establish one pattern for camera auto turning;
PATTERN NUMBER1/2: Camera supports 2 pieces pattern, using this item to edit the series
number of pattern;
RECORDER: The times of pattern turning (for GROUP only);
PROGRAM PATTERN: Using joystick to program the trace of camera, totally
support 16 pieces commands for one piece pattern;
CLEAR PATTERN: To delete one pattern;
RUN PATTERN: To run one pattern.
●
Using joystick to move camera to wanted beginning position, and adjusting lens to
suitable zoom times, input
“ FOCUS+ ” to begin recording, or input “ FOCUS- ” to abandon.
●
The recording supports up to 16 pieces movement command. The total recording
number be shown on screen.
●
The zoom changing of camera also be recorded;