7
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
•
Use a clamping device for securing the work piece.
•
Keep your hands away from the work piece.
•
Electrical safety
Always check that the voltage on the machine corresponds to the voltage on
the rating plate. Also check that your mains voltage corresponds to the input
voltage of the battery charger.
The machine is double insulated; therefore no earth wire is required.
•
Do not use the machine if the mains cable or the mains plug is damaged.
•
Only use extension cables that are suitable for the power rating of the machine with
a minimum thickness of 1.5 mm
2
. If you use an extension cable reel, always fully
unroll the cable.
Mains plug replacement
If the moulded 3-pin plug attached to the unit is damaged and needs replacing, it is
important that it is correctly removed and replaced by an approved BS 1363/13A
fused plug and that the following wiring instructions are followed. A Mains Plug that
has been cut off represents a serious safety hazard. Ensure it is safely disposed of.
The wires in the mains cable are coloured in accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable of the unit may not correspond to the
coloured markings identifying the terminals in the plug, proceed as follows:
•
The wire which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
•
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
OTM6016 Ma UK 1206-18.indd 7
6/18/12 11:25 AM
