11
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
Accessories
Fig. 1
4 + 5. Sanding sole:
Sanding near edges, corners and hard to reach areas. (Depending on the sanding
paper for sanding of wood, paint, varnish and stone.)
6. Scraper:
Scraping on solid surfaces. For instance removal of glue, carpets and tiles. (carpet,
flooring)
7. E-cut sawblade:
Separating and deep plunge cuts, for sawing close to edges, in corners and hard to
reach areas. (wooden materials, soft materials)
8. Segmented HSS saw blade:
Separating and deep plunge cuts, for sawing close to edges, in corners and hard to
reach areas. (Hard and soft wood, plastic, non-ferrous metals.)
Mounting accessories
For saw blades, scrapers and disc cutters and cutting discs use the clamping screw in
combination with the retaining ring.
•
Remove the clamping screw using an Allen key.
•
Replace the tool and tighten it using the clamping screw. Check that the tool is
secure in the chuck and that the machine is correctly secured and supported.
Fitting/replacing sandpaper
Using hook and loop fastening system.
•
Place the sandpaper in the middle of the sanding disc and press it firmly with your
hand.
•
Press the sandpaper firmly onto the plate with brief, firm pressure and then switch
on the machine. This ensures that the disc is correctly secured and prevents
excessive wear.
•
If the sandpaper is worn in a particular spot, you can remove it, turn it 120° and refit
it or replace it.
Warning! Switch the machine off and unplug the machine before mounting the
accessories.
OTM6016 Ma UK 1206-18.indd 11
6/18/12 11:25 AM
