Workzone WMW 300-1, User Manual

Page: 14 / 48

Preparation
USA
AFTER SALES SUPPORT 14
USA 1 866 326-6446 meister-service@meister-werkzeuge.de
Preparing the multifunction tool
CAUTION!
Risk associated with oscillating moving parts!
If you accidentally switch the multifunction tool on, you could
injure yourself on the moving parts that are oscillating.
− Before mounting accessories, disconnect the multifunc-
tion tool from the power supply.
Mounting the handle
− Screw the handle
6
onto the multifunction tool (see
fig. C). Make sure
that you screw the handle onto the left side of the multifunction tool if you
are right-handed and onto the right side if you are left-handed.
Connecting the dust extractor
1. Mount the extractor line
17
with the holding clips
2
onto the back of the
multifunction tool (see fig. B and M). Make sure that the extractor line is cor-
rectly positioned on the multifunction tool.
2. Mount the dust extractor
7
on the connecting nozzle
4
(see
fig. A and D).
3. Connect a suitable suction device to the dust extractor (e.g. shop vacuum
cleaner).
Mounting tools
Depending on the application, mount the tools listed below.
CAUTION!
Risk of injury!
If you mount the tools incorrectly and they are therefore able
to come into contact with your hand during use, there is a risk
of injury.
− Do not mount the tools such that there is a possibility of
them coming into contact with your hand.
For example: Ensure that the blades are not pointing to-
wards your hand.