AFTER SALES SUPPORT
USA
Safety
11
USA
1 866 326-6446
parts are broken or damaged so as to affect the function of the
power tool. Have damaged parts repaired before you use the
device. A large number of accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean. Well maintained cutting tools
with sharp cutting edges are less likely to catch and are easier to guide.
g)
Use the power tool, accessories, insertion tools etc. in accordance
with these instructions. At the same time, consider the working
conditions and the work to be performed. Using power tools for
applications other than the intended ones may result in dangerous
situations.
h)
If you notice any unusual phenomena: Switch the power tool off.
Disconnect the power tool from the power supply. Have autho-
rized qualified professionals check the power tool. Such unusual
phenomena may be: noises, odors, vibrations etc.
Service
a)
Only have your power tool repaired by a qualified professional
and only with original spare parts. This will ensure that the safety of
the power tool is not compromised.
Special safety measures when working with the
multifunction tool
Hold the power tool by the insulated handles when performing work
where there is a risk of the tool being used coming into contact with hid-
den power lines or its own power cable. Contact with a live line could also
energize metallic parts of the device and inflict an electric shock.
When working for prolonged periods, wear anti-vibration
gloves.
Working with vibrating tools for prolonged periods may cause circulatory disor-
ders and neurological diseases (Raynaud’s Disease).
Sanding e.g. coats of paint containing lead, various types of wood, metals
etc. could produce toxic/poisonous/carcinogenic dust. Coming into con-
tact or inhaling such dust may pose a risk to the operator or nearby per-
sons. Therefore, a dust extractor should always be connected; corresponding
personal protective gear including respiratory protection should be worn.
Keep children and other persons away during use.
Summary of Contents for WMW 300-1
Page 4: ...4 USA A 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 B 16 18 17 ...
Page 5: ...5 USA M L K J I H G F E D C 230 V 50 Hz ...
Page 46: ......
Page 47: ......
