Workzone Titanium DBAF50/40 Instruction Manual Download Page 17

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909 (toll free)

MODEL No.: DBAF50/40  •  61420  •  07/2018

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909 (toll free)

MODEL No.: DBAF50/40  •  61420  •  07/2018

32

33

The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the 

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, 
replaced or refunded at our discretion. T

conferred by this warranty are in addition to all rights and  

remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and 
similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled  
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality  
and the failure does not amount to a major failure.

Warranty Details

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier  
for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer 
hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player,  
games saved on a games console or files stored on a USB memory stick) during the process of repair,  
some or all of your stored data may be lost.  

We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of  
the same type or use refurbished parts in the repair process.  

Please be assured though, refurbished parts or replacements are only used where they meet  

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.  

Please call us on 1800 909 909, or email us at [email protected] 
Toolklub Pty. Ltd, 8 Ashenden Street, Leongatha, VIC, 3953
Toolklub Help Desk 1800 909 909 (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST)
EMAIL: [email protected]
INTERNET: https://help.tools/

Repair and Refurbished Goods 

 or Parts Notice

Brad Nailer / Stapler 20V

Brad Nailer / Stapler 20V

Summary of Contents for Titanium DBAF50/40



















Reviews: