AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: DBAF50/40 • 61420 • 07/2018
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: DBAF50/40 • 61420 • 07/2018
18
19
4. To remove the battery (17) from the charger
(18), press the battery release button on the
battery (17) and slide away from the charger
in the reverse direction it was installed into
the charger (18) (Fig C).
NOTE: For any issues related directly to
your purchased ALDI Xfinity Battery /
charger, contact the Customer Service of
the manufacturer as listed on the battery /
charger packaging, manual or on the label
on the battery / charger.
Belt Hook
Your Brad Nailer / Stapler comes with a belt hook
which is already assembled onto the product.
No assembly is required (Fig D).
D.
Preparation
Loading Nails and Staples into the Brad Nailer / Stapler
WARNING: Keep the tool pointed away from yourself and others
when loading nails or staples. Failure to do so could result in
possible serious personal injury.
WARNING: Ensure to remove battery pack from the tool during
nail / staple loading.
NOTE: If the staple or nail cartridge is not loaded correctly, the magazine
will not secure, and the magazine release latch (14) will not re-engage.
WARNING: Do not install nails and staples together.
A. Loading Staples
NOTE: Do not install staples of different sizes at the same time. Only
1 x cartridge of the same size staples should be installed at each use.
Loading various staple sizes at one time will cause malfunction and
void your warranty.
1. Press on the magazine release latch (14), to open the magazine (11)
(Fig E), ensuring you extend it out as far as it will release (Fig F).
2. To load staples, insert the cartridge of staples with the crown of the
staples to the top rear of the open magazine with the staple feet
facing away (Fig G).
C.
INSTALL
REMOVE
E.
F.
G.