Safety
13
AFTER SALES SUPPORT
GB
IRE
GB
0845 872 2740
IRE
019022605
− Do not operate the rotary hammer drill if it is visibly damaged
or if the mains cord or mains plug is defective.
− If the mains cord of the rotary hammer drill is damaged, the
manu facturer, its customer service team or a person with simi-
lar qualifications must replace it to avoid safety risks.
− Do not open the housing; instead, have a qualified pro-
fessional perform the repairs. Contact a qualified workshop
for this. Liability and warranty claims are waived in the event
of repairs performed by the user, improper connection of the
device or incorrect operation.
− Only parts that comply with the original device data may be
used for repairs. Electrical and mechanical parts, which are
essential for providing protection against sources of danger,
are located in this rotary hammer drill.
− Do not immerse the rotary hammer drill or the mains cord or
mains plug in water or other liquids.
− Never touch the mains plug with damp hands.
− Never pull the mains plug out of the socket by the mains cord;
instead, always do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the rotary hammer drill, mains plug and mains cord
away from open flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.
− Only use the rotary hammer drill indoors. Never operate the
rotary hammer drill in wet rooms or in the rain.
− Never store the rotary hammer drill such that there is a risk of it
falling into a tub or a basin.
− Never reach to retrieve the rotary hammer drill if it has fallen in
water. In such a case, immediately disconnect the mains plug.
− Always switch the rotary hammer drill off and pull the mains
plug out of the socket when you are not using the rotary ham-
mer drill, when you clean it or in the event of a fault.
