The Rugged Phone
04
Optional
Installing the battery
1. Loosen the screw, hold the back cover and gently slide in upward direction to open.
2. If the battery is in the compartment, lift and pull it out in the direction of the arrow (shown below).
3. Replace the battery. Align the contacts of the battery with the corresponding connectors in the battery compartment.
Charging the battery
To charge the phone’s battery:
1. Take the USB cable from the device packaging, and attach it to power adapter. Now connect the power adapter into a
standard AC wall outlet.
2. Connect the micro USB connector on the cable into its designated port on the device (left side). The battery level indicator
on the device screen will start scrolling horizontally to indicate that the battery is being charged.
3. When the battery is fully charged, the battery level indicator on the device screen will stop scrolling horizontally. Once
charging is complete, disconnect the charger from the device, and then from the wall outlet.
NOTE:
Exercise extreme caution while connecting the charger to the device. The connectors on the charger and on the phone
may get damaged if too much force is applied while connecting them. If the battery is completely discharged, it may take
a while before the on-screen charging indicator starts scrolling.
SIM card information
When you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your
subscription details, such as your PIN, and available optional services.
Be careful to handle, insert or remove the SIM card since the SIM card and the contacts inside can easily be damaged by
scratching or bending.
Installing the SIM card
Insert the SIM cards into their respective slots. Make sure that the contact area on the cards is facing the connectors on the
device (as shown below).