1
AFTER SALES SUPPORT
1300 855 831
MODEL: HCE2400 PRODUCT CODE: 62005 09/2018
AUS
Operation
HCE2400
22
2
Switch on the high pressure washer with the On / off switch (4). Only ever switch
on the high pressure washer once you have connected all of the water pipes
and they do not leak. The motor switches on until the required pressure has
built up. After the pressure has built up, the motor switches off.
3 Press the security switch (C) to unlock the gun starting lever (A). The nozzle
operates by pressure and the motor switches back on.
4 Releasing the gun starting lever (A) causes the high pressure washer to switch
off. The system remains pressurised.
5 After using the high pressure washer press the security switch (C) to lock the
gun starting lever.
Adjustment of the variable nozzle (Fig.4)
The variable nozzle (15) produces a flat wide jet particularly suited for large surfac
-
es. Turn the tip of the variable nozzle (15) left to reduce the width of the jet. Turn the
tip of the variable nozzle (15) right to expand the width of the jet.
Using the cleaning agent container (Fig. 1)
Remove the black cap from the cleaning agent container (8) and fill in suitable clean
-
ing agent.
Remove the variable nozzle (15) from the extension (13).
The cleaning agent will be added automatically if you use the lance.
If you don´t want mix cleaning agent with water, remove the cleaning agent contain-
er.
After use
1.
Switch off the high pressure washer.
2. Disconnect the high pressure washer from power supply.
3. Let the high pressure washer cool down.
4. Disconnect the high pressure washer from water supply and disassemble it.
5. Check after each use if the high pressure washer is damaged.