Workzone HCE2400, User Manual, Page: 15 / 22

AFTER SALES SUPPORT
19

1300 855 831

support@scheppach.com.au
MODEL: HCE2400 PRODUCT CODE: 62005 09/2018
AUS
HCE2400 Assembly
VII. Assembly
m
Warning! Ensure the high pressure washer is correctly and completely
assembled before use.
Mounting of the quick connector (Fig.2)
1 Remove the black cap from the back side of the high pressure washer.
2 Mount the quick connector (12) to the water inlet connection (10) at the back
side of the high pressure washer.
Mounting of the handle with holder for high pressure hose (Fig.2)
1 Push the handle with holder for high pressure hose (1) onto the fastening points
at the top of the high pressure washer.
2 Secure the handle with holder for high pressure hose (1) with the screws (16).
Use for this a screwdriver (not included).
Mounting of the holder for mains cable and lance holder (Fig.2)
1 Attach the holder for mains cable (3) and the lance holder (6) onto the both
fastening points at the side of the high pressure washer.
Mounting of the high pressure hose (Fig.3)
1 Remove the black cap from connection for high pressure hose (5).
2 Connect the high pressure hose (2) with the connection for high pressure hose
(5).
Mounting of the high pressure hose and the gun (Fig.4)
1 Plug the high pressure hose (2) into the gun (14).
2 For removal of the high pressure hose (2), push the lever (D) and pull out the
high pressure hose (2).