10
C
1
2
3
Intended use
First steps
Selecting the correct accessory
CGN300A / 90810
After Sales Support
0845 872 2740
GB
019022605
IRL
www.coreservice.co.uk
5) Additional handle (figure C)
Always fit the additional handle when you are
working with the tool.
Screw the additional handle in (13) to the tool
head depending how you are intending to work.
The tool has two holes so that you can change the
position of the additional handle.
The power tool is intended solely for sawing and cutting wood, plastic, plaster,
non-ferrous metals and fasteners (e.g. nails, staples).
It can also be used for working on non-hardened wall tiles and for dry sanding and
scraping small areas. It is particularly suitable for work in corners and for flush cutting.
Any other use or modification of the tool is considered to be improper use and can lead to
considerable hazards. We are not liable for any loss or damage arising from improper use.
The tool is not suitable for professional tasks.
•
Segment saw blade 11
Material:
wood, plastic, non-ferrous metals
Use:
•
cutting and plunge sawing
•
sawing close to a corner, and hard-to-reach spots, for example: parquet flooring, also
with plunge sawing
•
Plunge saw blade 7
Material:
wood, plastic, plasterboard and other soft materials
Use:
•
cutting and plunge sawing
•
sawing close to a corner, and hard-to-reach spots, for example: sawing of holes in stud
walls.
