background image

220W 3-in-1 Multi Purpose Sander

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL No.: S1B-DW01-220W  •  09/2018  •  61865

(toll free)

AFTER SALES SUPPORT

(toll free)

220W 3-in-1 Multi Purpose Sander

e-mail: [email protected]

1800 909 909

MODEL No.: S1B-DW01-220W  •  09/2018  •  61865

20

21

Maintenance

Warranty

WARNING!  Always remove the plug from the mains power socket 

before carrying out any work on the sander.

Cleaning the Dust collection box

1.   Remove the dust collection box (6) from the 

sander by pressing the release button for dust 

box (7) and pulling the dust collection box (6) 

backwards (Fig T), then by pulling up the tab 

on the lid (5) on the external corner of the dust 

collection box (6). Then remove the lid (Fig U).

2.   Clean both parts thoroughly by tapping to 

remove dust particles.

3.   After cleaning, re-apply the lid (5) back onto the 

top of the dust collection box (6).

4.   To re-connect the dust collection box (6), simply 

push it onto the adaptor fitting port (2) as far as 

it will go (Fig N), and ensure it is secure.

Maintenance and Cleaning

•    Always clean the sander immediately after 

completion of work.

•    Use a dry cloth to clean the housing. Remove 

any adhering swarf with a brush.

•    Never use sharp objects, petrol, solvents or cleaning agents that can 

damage plastic.  Do not allow any liquids to get into the interior of the 

sander.

•   Keep the ventilation openings free of obstructions at all times.

Transport & Storage

When transporting or storing the sander, it is recommended to secure the 

sander and contents within the carry case and ensure the latches on the carry 

case are securely closed.

Cord Set Replacement

If the cord set is damaged have it replaced by an authorised service centre.

Maintenance

T.

U.

Your new WORKZONE® TITANIUM 220W 3 in 1 Multi Purpose Sander will more 

than satisfy your expectations. It has been manufactured under stringent 

WORKZONE® TITANIUM Quality Standards to meet superior performance 

criteria.
You will find your new 220W 3 in 1 Multi Purpose Sander easy and safe to 

operate, and, with proper care, it will give you many years of dependable 

service.
CAUTION. Carefully read through this entire instruction manual before using 

your new WORKZONE® TITANIUM 220W 3 in 1 Multi Purpose Sander.
Take special care to heed the Cautions and Warnings.
Your WORKZONE® TITANIUM 220W 3 in 1 Multi Purpose Sander has many 

features that will make your job faster and easier.  Safety, performance, 

and dependability have been given top priority in the development of this 

WORKZONE® TITANIUM 220W 3 in 1 Multi Purpose Sander , making it easy to 

maintain and operate.
Use only WORKZONE® TITANIUM replacement parts for your product.  

Non-conforming parts or modifications made to parts will void your 

warranty.

Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local  

recycling centre and disposed of in an environmentally safe way.

Warranty

Environmental protection

Summary of Contents for 61865
















Reviews: