Workzone 14.4 V LITHIUM-ION CORDLESS DRILL User Manual Download Page 5

AFTER SALES SUPPORT

t

 0151 649 1500

(Charged at local rates)

www.einhell.co.uk

1890 946 6244

WZAS 14,4/1 Li

XI/18/2012

2. Electrical safety

 

The plug on the power tool must fit into the socket. The socket 
must not be modified in any way. Do not use adapter plugs 
together with power tools with a protective earth.
 Unmodified 
plugs and matching sockets will reduce the risk of an electric shock. 

 

Avoid body contact with earthed surfaces such as pipes, heating 
systems, stoves and refrigerators.
 There is an increased risk of 
suffering an electric shock if your body is earthed.

 

Keep the power tool out of the rain and away from moisture. The 
ingress of water into an electric power tool increases the risk of an 
electric shock.

 

Do not use the cable for a purpose for which it is not designed, 
for example to carry the power tool, hang it up or to pull the 
plug out of the socket. Keep the cable away from heat, oil, sharp 
edges or moving parts of the tool. 
Cables that are damaged or 
tangled increase the risk of an electric shock.

 

If you use an electric power tool outdoors, use only extension 
cables that are suitable for outdoor use.
 The use of an extension 
cable which is suitable for outdoor use reduces the risk of an electric 
shock.

 

If you cannot avoid using the power tool in a damp location, 
use a residual current device (RCD) circuit breaker.
 The use of a 
residual current device (RCD) circuit breaker will reduce the risk of 
suffering an electric shock.

3. Safety of persons

 

Be careful, watch what you are doing and be sensible and 
responsible when using an electric power tool. Never use the 
power tool if you are tired or under the influence of drugs, 
alcohol or medication. 
One moment of inattention when using the 
electric tool can result in serious injuries.

 

Wear personal safety equipment and always wear safety 
goggles. 
Wearing personal safety equipment such as dust masks, 
non-slip safety shoes, a helmet or ear plugs, depending on the type 
and application of the tool, reduces the risk of injury. 

 

Make sure that the tool cannot start up accidentally. Ensure that 
the power tool is switched off before you connect it to the power 
supply and/or connect the battery pack, pick it up or carry it. If you 

WZAS_14_4_1_Li_UK_SPK7.indb   5

30.07.12   08:49

Summary of Contents for 14.4 V LITHIUM-ION CORDLESS DRILL

































Reviews: