Workzone 14.4 V LITHIUM-ION CORDLESS DRILL User Manual Download Page 10

10 

AFTER SALES SUPPORT

t

 0151 649 1500

(Charged at local rates)

www.einhell.co.uk

1890 946 6244

WZAS 14,4/1 Li

XI/18/2012

 

Please check the data marked on the rating plate of the battery 
charger. Be sure to connect the battery charger to a power supply 
with the voltage marked on the rating plate. Never connect it to a 
different mains voltage.

 

Protect the battery charger and its cable from damage and sharp 
edges. Have damaged cables repaired without delay by a qualified 
electrician.

 

Keep the battery charger, batteries and the cordless tool out of 
children‘s reach.

 

Do not use damaged battery chargers.

 

Do not use the supplied battery charger to charge other cordless 
tools.

 

In heavy use the battery pack will become warm. Allow the battery 
pack to cool to room temperature before commencing with the 
charging.

 

Do not over-charge batteries. 

 

Do not exceed the maximum charging times. These charging times 
apply only to discharged batteries. Frequent insertion of a charged 
or partly charged battery pack will result in over-charging and cell 
damage. Do not leave batteries in the charger for days on end.

 

Never use or charge batteries if you suspect that the last time 
they were charged was more than 12 months previously.
 There 
is a high probability that the battery pack has already suffered cell 
damage as a result of complete battery discharge.

 

Charging batteries at a temperature below 10°C will cause chemical 
damage to the cell and may cause a fire.

 

Do not use batteries which have heated during the charging process, 
as the battery cells may have suffered dangerous damage.

 

Do not use batteries which have suffered curvature or deformation 
during the charging process or which show other non-typical 
symptoms (gassing, hissing, cracking,…)

 

Never fully discharge the battery pack (recommended depth of 
discharge max. 80%) A complete discharge of the battery pack will 
lead to premature ageing of the battery cells.

 

Never charge the batteries unsupervised.

WZAS_14_4_1_Li_UK_SPK7.indb   10

30.07.12   08:49

Summary of Contents for 14.4 V LITHIUM-ION CORDLESS DRILL

































Reviews: