- 2 -
(3)
Pedal Installation:
·
Both pedals have either an “L” or and “R” denoting which side of the trike they are
made for.
·
Screw each pedal onto its designated side using a wrench, making sure that the pedals
are secure.
(4)
Handlebar Installation:
·
Turn screw on top of handlebar stem so that the wedge is at a low
height. Then, insert handlebar stem into front fork tube at desired
height (make sure that it is past the minimum height or damage to the
tube may occur). Now turn screw on top of handlebar stem so that the
wedge rises, locking it in position.
·
Slide the handlebars through the opening in the stem, place at desired
angle, and tighten the nut on the bottom of the opening.
·
Rinse the inside of the handlebar grips, and slide onto the ends of the
handlebar
(5)
Seat Installation:
·
Take seat post, and place in inside the clamp underneath the seat.
Tighten nut underneath to secure seats attachment to seat post.
·
Remove the seat bolt from the frame, and place seat post bracket over
the frame. Replace the seat bolt through both the frame and the
bracket, and tighten with accompanying nut.
