7
oPeRATIoN (continued)
1.
To remove the lid to empty contents of
the dust drum, simply lift the two drum
latches on the side of the Vac and lift
the power head up and off the dust
drum and set to the side. Be sure to
unplug the vacuum before removing lid.
2.
Set the power head on a clean dry area
while emptying the drum or changing
the Filter.
3.
Dump the drum contents into the proper
waste disposal container.
emptying the Drum
blowing feature
Your Wet/Dry Vac has the capability to be
used as a blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
Power
Head
Drum
Pull Out
And
Lift Up
Drum Latch
WARNING: Always wear safety
eyewear complying with ANsI Z87.1
(or in canada, csA Z94.3) before
using as a blower.
cAuTIoN: Wear a dust mask if
blowing creates dust which might
be inhaled.
cAuTIoN: To reduce the risk of
hearing damage, wear ear protectors
when using the vac/blower for
extended hours or when using in a
noisy area.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
!
!
!
!
Your Vac has a convenient area to store
your power cord and Vac hose.
Wrap the power cord around the top of
the handle on the Vac and attach the end
of the plug to the cord.
Wrap the hose around the Vac as shown
and place the small swivel end inside the
larger one.
coRD & hose sToRAGe
Hose
Storage
Area
Power
Cord
Handle
SP6930 Workshop.qxp_SP6439-3_ES.qxd 12/2/14 10:09 AM Page 7
