9
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
Emptying the Drum
1.
Place Vac squarely on a stable surface,
such as ground, floor, bench, etc.
2.
Remove the power head assembly of
the Wet/Dry Vac by pulling outward on
the latches located on each side of the
Vac. Lift off the power head assembly.
3.
Dump the drum contents into the proper
waste disposal container.
Blowing Feature
Your Vac contains a blowing feature. It has
the capability to blow sawdust and other
debris. It is excellent to use to blow dust
and debris out of garages or off patios and
driveways. Follow the steps below to use
your Vac as a blower.
1.
Locate blowing port of your Vac.
2.
Insert one end of the 4 foot x 1-1/4 inch
hose into the blowing port.
3.
Turn Vac “ON” and you are ready to use
your Vac as a blower.
!
OPERATION (continued)
Unlatch
Power Head
Assembly
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended hours or when using in a
noisy area.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
!
!
!
!
SP6848-3 Workshop WS0250VA0.qxp_SP6848 12/14/15 3:47 PM Page 9
