background image

 

SAFETY PRECAUTIONS 

 

MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS, AVOID NEEDLESS 

ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW. 

• 

Machinery should be operated only by those 
who are responsible and are authorized to do so.

• 

Stop the engine, lower all equipment, lock the 
brakes, and remove the ignition key before 
dismounting from the tractor. 

• 

Never stand between tractor and implement 
while tractor is being backed to hitch. 

• 

Loose fitting clothing should not be worn, to 
avoid catching on various parts. 

• 

Detach implement in area where children 
normally do not play. 

• 

When performing adjustments or maintenance 
on an implement, first lower it to the ground or 
block it securely at a workable height. 

• 

Only a qualified operator should be permitted 
on tractor when in operation; no riders allowed.

• 

Make certain everyone is in the clear before 
starting tractor or raising or lowering 
equipment. 

• 

Operate the tractor and implement only while 
seated in the driver’s seat. 

• 

Reduce speed when transporting mounted 
implement to avoid bouncing and momentary 
loss of steering control. 

• 

A heavy load can cause instability of the 
tractor.  Use extreme care during road travel.  
Slow down on turns and watch out for bumps.  
Tractor may need front counter-weights to 
counter-balance the weight of the implement.

• 

Reduce speed on hillsides or curves so there is 
no danger of tipping. 

• 

Avoid driving too close to the edge of ditches 
or creeks. 

• 

Do not transport implement on public toads 
without reflectors and slow moving vehicle 
emblem in daylight and with approved 
warning lights at night and other periods of 
poor visibility. 

• 

Due to the width of some implements, use 
extra caution on highways, farm roads, and 
when approaching gates. 

• 

Always be sure the implement is in the proper 
position for transport. 

• 

Keep alert and watch the front as well as the 
rear when working with the implement

OWNER’S 

MANUAL

 

 

MODEL NO. 

HK-305 

 

WHEN ORDERING 

REPAIR PARTS, ALWAYS  

GIVE THE FOLLOWING 

INFORMATION: 

 
1.  PART NUMBER 
2.  PART DESCRIPTION 
3.  MODEL NUMBER 
4.  NAME OF ITEM 
 
MARCH 2001 

 

 
 

WORKSAVER LIMITED WARRANTY 

   

Worksaver

 warrants its implements, parts and accessories to be free from defects in 

materials and workmanship for a period of six (6) months from the date of purchase.  Upon 
written approval, 

Worksaver

 will repair or exchange without charge any part, which upon 

examination by 

Worksaver

 or its authorized agent, shall disclose to be defective. 

     This does not apply to (1) parts that have worn out in normal use, (2) parts broken because 
of improper assembly or operation by the customer, (3) parts accidentally damaged, (4) failure 
of parts traceable to improper care, (5) parts failing through use of implement for purposes 
other than those for which it was designed. 
     The obligations assumed by 

Worksaver

 and the limitations expressed herein are in lieu of 

all other warranties expressed or implied. 

WORKSAVER, INC

P.O. BOX 100, LITCHFIELD, IL. 62056-0100 

Phone: 1-217-324-5973   Fax: 1-217-324-3356   

Web Site: 

www.worksaver.com

     E-Mail: 

[email protected]

 

 

3 PT. HITCH ADAPTER KIT 

HK-305 – 

For A.C. Models WD & WD45 Tractors 

Please work, play, and live each day with care and 
concern for your safety and that of your family and 
fellow citizens

Summary of Contents for HK-305







Reviews: