Workrite Ergonomics | 800.959.9675 www.workriteergo.com
5 of 10
Attach Base to Workrite Pre-Drilled Workrite Worksurface
If you have a non-Workrite worksurface skip to Step 5.
Note: For 2-Leg Corner and 120° Worksurface Mounting Instructions, go to:
www.workriteergo.com/instructions
Position leg assembly to align
mounting holes in brackets to pre-
drilled holes in worksurface.
Attach at the four corner locations
using #12 × ¾" Pan Head Laminate
Top Screws (I). If you use an electric
screwdriver, be sure it is on the
lowest torque setting to avoid
stripping the holes in the top.
With frame set positioned and the four corner screws secure, attach frame set using the remaining #12 × ¾" Pan
Head Laminate Top Screws (I).
Tighten securely.
I
I
I
I
3 screws per
Short Bracket
2 screws per End Bracket
(2 installed in Step 4b)
16 screws per
Rear Bracket Assembly
a
a
front
b
b
b
c
c
c
b
a
b
c
4
I
#12 × ¾" Pan Head
Laminate Top Screw
Hardware at actual size
