Workrite Ergonomics | (800) 959–9675 www.workriteergo.com
5 of 12
3
Attach Short & Medium Brackets
3.1 Attach Short Brackets (E) using #M6×14 mm Flat Head Cap Screws
(D) to all three Legs.
3.2 Attach Right End Bracket (G) to sides of the Right Leg (A) using #M6 × 14 mm Flat Head Cap Screws (D). Attach
Left End Bracket (F) to sides of the Left Leg (A) using #M6 × 14 mm Flat Head Cap Screws (D).
3.3 Attach Corner End Bracket (H) to the Center Leg (A) using #M6 × 14 mm Flat Head Cap Screws (D).
3.4 Attach both the Connected Rear Bracket (B & C assembled) and Floating Rear Bracket (B or B & C assembled)
using #M6 × 14 mm Flat Head Cap Screws (D).
3.5 Make sure the Connected Rear Bracket is
on the longer of the two sides.
Tighten securely.
Note: The Right End Bracket (G) will be on
your left when upside down.
Note: Left configurations will assemble as
a mirror image of these instructions.
Left Leg
Center Leg
Right Leg
Three piece
Connected Rear Bracket
B
&
C
assembled
Floating Rear Bracket
B
or
B
&
C
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with an Allen
wrench (J), ensuring it is in straight.
Right End Bracket
Left End Bracket
E
D
D
D
D
D
D
D
B
J
D
D
E
E
H
A
A
F
G
A
Right configuration
44" & 48" configurations have a single Floating
Rear Bracket
B
on the shorter side.
3.1
3.2
3.2
3.3
3.4
3.4
3.5
3.5
3.4
3.1
3.1
Left configuration
44" & 48" configurations
D
#M6 × 14 mm Flat Head
Cap Screw
Hardware at actual size
Caution!
Only use the #M6 × 14 mm Flat Head
Cap Screw (D) for assembly.
