Workrite Sequoia Monitor Arm - Assembly Instructions
2
Workrite Ergonomics 800.959.9675 www.workriteergo.com
B
Cable Manager
Qty: 1
K
Outside VESA Mounts
Qty: 2
C
Collar
Qty: 1
J
Center VESA Mount
Qty: 1
F
VESA Mount Knob
Qty: 2
E
Plastic Washer
Qty: 2
D
Ratchet Lever
Qty: 3
M
Right Wing Bar Mount
Qty: 1
N
Left Wing Bar Mount
Qty: 1
O
Wing Bars
Qty: 2
Capped Pole carton, 3 monitors, includes standard base:
Desk Mount carton:
Hardware Packs:
G
M5 × 4mm Set Screw for
Collar
Qty: 3
Q
Steel Spacers
Qty: 2
H
M4 × 8mm VESA Mount
Screws
Qty: 12
R
8mm Flat Washer
Qty: 4
I
2.5mm Hex Wrench
Qty: 1
S
6mm Hex Wrench
Qty: 1
P
M8 × 50mm Arm Bolt
Qty: 2
Need Bolt!
OR
Hardware Packs:
T
2 Piece C-Clamp
Mount
Qty: 1
U
Grommet Mount
Qty: 1
G
M5 × 4mm Set Screw for
Desk Mount
Qty: 3
V
M6 × 10mm Alan Cap Bolt
Qty: 2
W
M8 × 65mm Grommet Bolt
Qty: 1
I
2.5mm Hex Wrench
Qty: 1
S
6mm Hex Wrench
Qty: 1
S
6mm Hex Wrench
Qty: 1
X
Grommet Clamp Plate
Qty: 1
G
M5 × 4mm Set Screw for
Desk Mount
Qty: 3
I
2.5mm Hex Wrench
Qty: 1
Parts grouped by carton
Note: Part letters are nonsequential to accommodate all Sequoia Models
Verify that you have all the hardware and tools needed for the assembly.
Check your packages against the parts list above to verify that you have all the parts needed. You will
also need the following tools:
#3 tip Phillips screwdriver
AA
Capped Pole
Qty: 1
