1 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
A
Conform Static Arms Assembly
Qty: 2
D
Dual Pole Mount Adaptor
Qty: 1
G
Wedge Washer
Qty: 2
H
Pivot Cover Cap
Qty: 2
I
Hook & Loop Strips
Qty: 4
B
Pin Assembly with
Bolt and Washer
Qty: 2
C
30 × 7 mm Spacer
Qty: 2
Parts Included
Required Parts Sold Separately
Tools Required
Assembly & Installation Instructions:
Conform Dual Static Arms CONF-2SDS-WOPB-S
#2 Phillips head screwdriver
2.5 mm Allen wrench (included with base)
4 mm Allen wrench (included with base)
5 mm Allen wrench (included with base)
Selected base option with mounting hardware.
E
M4 × 10 VESA
mount screw
Qty: 8
F
M4 × 6 VESA
mount screw
Qty: 8
Attach Dual Pole Mount Adaptor
to Pole
Place the Dual Pole Mount Adaptor on selected pole option, at your
desired monitor height.
Tighten the Tension Screw on Dual Pole Mount Adaptor (D)
with 5 mm Allen wrench, included with base, to
secure Adaptor to Pole.
Do not use on hollow core tables.
Do not rotate or suspend arm beyond table surface.
Do not exceed 16 lb. per Arm.
1
a
a
b
D
14" Pole Base shown
b
