WorkPro WTS 1206, Operating Instructions Manual, Page: 9 / 48

7
USER MANUAL FOR WTS TOWERS
Figure 13
Do not stand under the load. The load must be
secured to the tower in order to prevent that it
cannot fall down.
Figure 14
Verify that the tower is beyond the reach of
power lines.
The tower is not electrically insulated and can
transmit currents of power lines.
On the following table is recommended the
average length between the highest part of the
structure and the power lines.
Voltage Min. distance
Between phases Meters Feet
0 a 230v 1.5 4.92
230v a 400v 2.8 9.19
400v a 50Kv 3.4 11.15
50Kv a 200Kv 4.9 16.08
200Kv a 350Kv 6.5 21.33
350Kv a 500Kv 8.2 26.90
500Kv a 750Kv 11.3 37.07
750Kv a 1000Kv 14.2 46.59
Figure 15
Not use the tower as welding mass.
Figure 16
Not lift a load if there is danger of collision. Take
at least 1.5 meters on any direction to lift the
load safely.