WorkPro WTS 1206, Operating Instructions Manual, Page: 15 / 48

13
USER MANUAL FOR WTS TOWERS
Figure 32
Place the reinforcement bars and fix them with
its pins to the frontal legs.
Figure 33
Place the tower in its working position and level
until the bubble level is centered. Wheels should
not get in contact with the ground.
Calculate the load to be lifted with the tower.
An example of basic load calculation is attached
.
ITEM
WEIGHT
(kg)
QUANTITY
TOTAL
(kg)
Line array
accessory
5,5 1 5,5
Bumper 35 1 35
Loudspeakers 28 4 112
Cables 20 1 20
172,5
Figure 34
In this example we have obtained a weight of
172,5 kg.
With that load, see what position the load should
have on the forks of the tower. Take into account
that the inclination of the loudspeakers and the
bumper should not lean against any part of the
tower
.
Figure 35
Choose the WTS tower model. Check for the
value immediately above the load you need.
With this value, take the farthest position to
which the accessory for flying must be placed. It
is recommended that this position is always as
close to the carriage as possible.