CORDLESS SCREWDRIVER
1 Bit Holder
2 LED Worklight
3 Bit Cartridge
4 Bit View Window
5 Forward / Reverse Trigger
6 Charge Indicator LED
7 Charging Socket
8 Sure Grip Handle
9 Loading Switch
ACCESSORIES
10 Charging Adaptor
11 Charging Jack
12 Driver Bits x 12
To reduce the risk of electric shock, this product must be used with a residual
current device (rated at 30mA or less).
1. Plug the charging adaptor into
a power socket.
3. Turn on the power point and the
red light on handle of the
screwdriver will illuminate when
properly connected and charging.
2. Insert the charging jack into
the charging socket on the
screwdriver.
KNOW YOUR PRODUCT
1. CHARGING
SETUP & PREPARATION