31
Questions? Give us a call!
800.778.8779
workhorseproducts.com
Visit our website at
Daily
Make sure compressor has been drained of any water and the chiller is funconing properly.
Make sure Regulator and Filter are clean and free of any liquid.
Weekly
Grease control arm Zerk.
Grease the Linear rail tracks that the indexing carriage travels on. Place a small amount of white lithium grease on your finger and
apply to the rails where the bearings roll
Monthly
Open up the micros and dab grease on the micro thread bolts and work them all back to center posions
Clean print head tracks and smear a light amount of grease in the wheel track, try not to use to much as it could build up and fall
down in a screen
Rear screen clamps will need grease put on the rear micro assembly by just dabbing the grease on threads and then working then
micro back and forth
Open pressure assembly and lube the threaded bolt, then work it back to normal posion.
Summary of Contents for Javelin PRO
Page 1: ...PN 67 1540 REV A 4 12...
