7
CHARGING
This device is applied with an Android USB port. To charge the battery, use an Android USB cable and
cell phone charger. When connected,
the red light means “charging” and the blue light means “full”.
MUSIC PLAYING
MODE 1
– BLUETOOTH
1.
Press the switch and turn on the board. Wait for the voice signal: “The Bluetooth device is
re
ady to pair.”
2. Turn on the Bluetooth on your cell phone and se
arch for the device name “Workerboard”. Click
on it to bind with the board. Wait for the voice signal: “The Bluetooth device is connected
successfully.”
3. Play music and enjoy the listening.
MODE 2
– SD CARD
1. Turn on the board.
2. Insert the SD card.
3. Play music automatically.
1) SD card port
2) Function switch
SWITCHING THE LIGHT TRANSMIT MODE
1) Turn on the board.
2) Push and hold the function switch for 5 seconds until you hear a beep.
3) The transmission will last for 1 min. Thereafter it shuts down automatically. It is possible to
reverse the process.
