S A F E T Y I N F O R M AT I O N | 5
You will be creating incredibly sharp knives and tools with this sharpener. Please handle them with care. Use
caution to avoid cutting yourself.
GENERAL POWER TOOL SAFETY WARNINGS
•
WARNING!
Read all safety warnings, instructions, illustrations and specifications provided
with this power tool .
Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit .
Cluttered or dark areas invite accidents.
b) Do not operate power tool in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust .
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool .
Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools .
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators .
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions .
Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use .
Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter
(RCD) protected supply .
Use of an RCD reduces the risk of electric shock. (It is recommended that the
tool is always supplied via a residual current device with a rated residual current of 30 mA or less.)
SAFETY INFORMATION
Summary of Contents for WSKTS2-A
Page 87: ......
