NOTICE:
A.3-1 (8) picture On-Off switch, When the A.3-2(9) indicator light show the power tools connected
to the power, can start work.A.3-2(10) variable speed can control the hammer and drill speed.
4.
Extensional cord
When the work area is removed form the power source, use an extension cord of sufficient thickness and
rated capacity. The extension cord should be kept as short as practicable.
5.
Mounting a tool
Note:
When handling bull point, cold chisel and other accessories, standard tools are recommended for
better operation.
Handle Attachment (1)
For reasons of safe, only use the hammer drill with handle attachment.
you will be able to obtain a safe body position when work by rotating the handle attachment in an
anticlockwise.
Safety Clutch (2)
The safety clutch is activated if the drill becomes jammed or caught. This prevents the machine from being
wrenched from the operator’s hand.
NOTICE: FOUCTION FOR THREE PICTURES
A.4-1: Only Hammer
A.4-2: Hammer &drill
A.4-3: Spindle Lock
Auxiliary handle (3)
The machine must not be used without auxiliary handle and must always be held with both hands. Loose
handle by rotating counter-clockwise rotate.
Auxiliary handle adjust the working position. The handle must be re-tightened.
