Worcraft CS2600, Instruction Manual

Page: 67 / 92

CHAIN SAW
IN INTENDED USE
Danger! This chainsaw is a special type of chainsaw intended specifi cally for tree care. During use, the rear handle should be
held in the right hand and the front handle should be held in the left hand. It should only be operated by fully trained users to
remove branches and to cut off the tops of standing trees. Persons using the chainsaw must have read and understood the
safety requirements contained in the operating instructions, and they must wear appropriate personal protective equipment
(PPE). The chainsaw may be operated only by persons who are fully trained for this type of chainsaw. The user must be trained
in all manual chainsaw work skills. This chainsaw is not intended for use in other types of applications.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user /operator
and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will
be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
TECHNICAL SPECIFICATIONS
Type / model: GCS26-10 (CS2600) Gasoline tank capacity 230 cm
3
Engine displacement 25.4cc Oil tank capacity 160 cm
3
Engine type 2-stroke Sprocket teeth 6 teeth x 9.525mm
Maximum engine power 0.7kW Anti-vibration Yes
Max.engine speed 11000/min Net weight without chain and bar 3.25kg
Idling engine speed
3300
±
300 /min
Sound pressure level
LpA:99,2dB (A),K=3 dB (A)
Chain bar length 10
” (254mm)
Sound power level LwA: 110,4 dB (A), , K=3 dB (A)
Cutting length 200mm Sound power level guaranteed
113 dB (A)
Max chain speed 21m/s Vibration (front handle) a
hv= Max.8.98m/s
2
,K=1.5 m/s
2
Chain pitch (0.375
”) 9.525mm
Vibration (rear handle) a
hv= Max.8.03m/s
2
,K=1.5 m/s
2
Chain thickness (0.05
”) 1.27mm
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in
ISO22868 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Wear a hard hat!
Read the manual.
Wear ear protection.
Wear eye protection Wear breathing protection
Keep hands away from blade Wear non-slip safety shoes!
WARNING! Risk of kickback.
Protect yourself from kickback from
the chainsaw and avoid all contact
with the rail tip. WARNING! Risk of kickback!
Do not saw with the tip of the blade.
Always operate the chainsaw with
both hands. Do not work with the chainsaw in
one hand.