27
General information
6 720 612 220 GB (05.09)
9
General information
... Notes on saving energy:
• The temperature in the room where the RT 10
is installed acts as a guide parameter for the
entire heating network. As a result, the power
of the radiators must be set as low as possi-
ble, using thermostatic radiator valves.
• Control the temperature in the adjoining
rooms via thermostatic radiator valves.
• Heat from other sources in the room (e.g. sun-
shine etc.) can lead to the heating in the
adjoining rooms remaining too low.
• A significant amount of energy can be saved
by lowering the room temperature. A reduc-
tion in temperature by 1 K (˚C) can result in
up to 5 % energy saving.
• Good thermal insulation of the building: The
set low temperature level is not reached.
Energy is therefore saved, as the heating
remains switched off.
• Do not keep windows open on vent setting to
ventilate. This would continuously cool down
the room without significantly improving the
air in the room.
• Ventilate fully for a short time (completely
open windows).
• Turn the thermostatic valve during ventilation
or switch to low setting.