background image

18

Environment / disposal

Greenstar Ri 

ErP

 - 6 720 813 340 (2014/09)

10

Environment / disposal

Environmental protection is a fundamental corporate strategy of the Bosch Group. 
The quality of our products, their economy and environmental safety are all of equal importance to us and all environmental 
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for protecting the environment taking account of economic considerations.

Packaging

We participate in the recycling programmes of the countries in which our products are sold to ensure optimum recycling. 
All of our packaging materials are environmentally compatible and can be recycled.

11

Your guarantee

This boiler has a guarantee against faulty materials or workmanship for a period from the date of installation subject to the following 
terms and conditions:

During the period of this guarantee any components of the boiler which are proven to be faulty or defective in manufacture will 
be exchanged or repaired free of charge by Bosch Thermotechnology Ltd.

The householder may be asked to prove the date of installation, that the boiler was correctly commissioned and, where 
appropriate, the first year's service has been carried out to the satisfaction of Bosch Thermotechnology Ltd, when requested. 
These should be documented as a part of the Benchmark Checklist.

The boiler has been used only for the normal domestic purposes for which it was designed.

This guarantee does not affect your statutory rights.

Guarantee registration

Your Greenstar boiler carries a guarantee against faulty material or manufacture subject to Terms and Conditions. 
To read the full Terms & Conditions please visit us on-line at www.worcester-bosch.co.uk/guarantee. The Guarantee Registration 
form is available on this same page and can be completed and submitted electronically. 
Alternatively please telephone one of our Guarantee Registration advisors on 0330 123 2552. 
Your statutory rights are not affected by the manufacturer’s guarantee.

For your own record:

Please ensure that the Benchmark Checklist has been completed by your installer or service engineer.

USED APPLIANCES

▶ All Greenstar gas boilers are 100% recycleable.

The various assemblies can be easily dismantled and synthetic materials are marked accordingly. Assemblies 
can therefore be sorted by composition and passed on for recycling.

Model

Serial No.

1)

1)  See boiler identification label on boiler fascia or Benchmark Checklist in the back of the Installation, Commissioning & Servicing 

Instructions.

Type/size

Date of installation

Name of Installer

Telephone number of Installer

Table 4

Summary of Contents for GREENSTAR Ri ErP Series





















Reviews: