Supplied By www.heating spares.co Tel. 0161 620 6677
USER INSTRUCTIONS & CUSTOMER CARE GUIDE
USING Y
OUR
APPLIANCE
OPERATING THE APPLIANCE
8 716 115 220a (07.2008)
OPERATING THE APPLIANCE
9
FROST PROTECTION
If heating is NOT required:
Leave master switch on.
Turn the central heating temperature
control to
If the temperature falls to 5 °C inside the
boiler, the boiler will fire to prevent the
possibility of freezing.
Add a suitable anti-freeze fluid to the water
in the central heating system.
If remote pipework is likely to be subjected
to freezing conditions, ensure the installer
has fitted a frost thermostat in the area to
protect the pipework.
CONTROLLING THE HOT WATER
TEMPERATURE
The hot water temperature can be set to
between approx. 45 °C and 65 °C using
the temperature control
ECO INDICATOR
NOTE: If your boiler has an in-built fascia
mounted programmer and the mains supply
is interupted, the ECO button will need to
be reset by pressing and holding for three
seconds.
When the ECO button
IS
lit the pre-heated
tank of hot water is turned off, but the boiler
will supply hot water as a normal Combi boiler.
It will take longer to obtain hot water at the
tap in ECO mode as the boiler is not
maintaining a supply of hot water for
immediate use.
When the ECO button is
NOT
lit the boiler is
in pre-heat mode for hot water.
Hot water will now be available at the tap
almost immediately as the boiler constantly
maintains a tank of hot water ready for use.
---
1
---
2
---
3
---
4
---
5
---
6
---
Max. ---
45 ºC
50 ºC
52 ºC
54 ºC
56 ºC
58 ºC
60 ºC
65 ºC
APPROXIMATE TEMPERATURES
Min.
