background image

17

GUARANTEE REGISTRATION

Model

Serial No.

(See identity label inside boiler casing)

Type / size

Date of installation

Installer details

GUARANTEE REGISTRATION

You should complete and return the postpaid
Guarantee Registration Card within 30 days of
installation.

Returning your card will register you as the
owner of your new boiler and will assist us in
maintaining an effective and efficient customer
service by establishing a reference and
permanent record for your boiler.

This does not affect your statutory rights.

For your own record:

YOUR GUARANTEE

This boiler is guaranteed against faulty materials
or workmanship for a period of 24 calendar
months (60 months for the primary heat
exchanger) from the date of installation subject
to the following conditions:

That during the period of this guarantee any 
components of the unit which are proved to 
be faulty or defective in manufacture will be 
exchanged or repaired free of material 
charges and free of labour charges if 
repaired directly by Bosch Thermotechnology

Ltd. 

Please be aware that invoices 

for attendance and repair of this 
boiler by third parties will not be
accepted for payment by Bosch
Thermotechnology Ltd.

That the householder may be asked to 
prove, when requested, the date of 
installation, that the boiler was correctly 
commissioned and, where appropriate, that 
the 12 month service inspection has been 
carried out to the satisfaction of Bosch
Thermotechnology Ltd, when requested. 
The guarantee card must then be returned 
within 30 days of installation.

That any product or part thereof returned for 
servicing under the guarantee must be 
accompanied by a claim stating the Model, 
Serial Number and Date of Installation.

That Bosch Thermotechnology Ltd will not 
accept responsibility for damage caused by 
faulty installation, neglect, misuse or 
accidental damage and non-observance of 
the instructions contained in the Installation 
and Users Instructions leaflets.

That the boiler has been used only for 
normal domestic purposes, for which it was 
designed.

This guarantee applies only to equipment 
purchased and installed in mainland UK.

This guarantee is given in addition to all your
normal statutory rights.

Worcester, Bosch Group is a brand name of
Bosch Thermotechnology Ltd.

GREENSTAR HEATSLAVE 12/18 - 18/25 - 25/32

8 716 106 253f (03.2010)

G

U

ARANTE

E

8 716 106 253f  30/3/10  12:59  Page 19

Summary of Contents for Greenstar Heatslave 18/25





















Reviews: