Worcester Greenstar CDi Compact ErP User Instructions Download Page 4

4

Key to symbols and safety instructions

Greenstar CDi Compact

 

ErP

 - 6 720 813 277 (2014/09)

1

Key to symbols and safety instructions

1.1

Key to symbols

Warnings

The following keywords are defined and can be used in this 
document:

NOTICE

 indicates a situation that could result in damage to 

property or equipment.

CAUTION

 indicates a situation that could result in minor to 

medium injury.

WARNING

 indicates a situation that could result in severe 

injury or death.

DANGER

 indicates a situation that will result in severe 

injury or death.

Important information

Additional symbols

Examples of additional symbols used

A numbered step in an action sequence

A sequence of numbered steps or actions carried out in a 
specific order to complete a task.
1. First action
2. Second action
3. Third action

etc.

A step in an action sequence

A sequence of defined actions or steps carried out in order to 
complete a task.
▶ Action
▶ Next  action
▶ etc

A reference to a related part in the document or to other 
related documents.

To refer the reader to a specific figure/table/section within the 
manual.

 e.g. figure 1.

A reference number to identify or refer to a part or item.

In a related figure, items or parts identified by a sequential 
number.

List entries, first and second levels

A single component/item

A component/list, made up of multiple parts/items.
– Sub component or sublist of main component/list.
– etc.

1.2

Safety precautions

If you smell gas:

A gas leak could potentially cause an explosion. If you smell gas, 
observe the following rules.

▶ Prevent flames or sparks:

– Do not smoke, use a lighter or strike matches.
– Do not operate any electrical switches or unplug any 

equipment.

– Do not use the telephone or ring doorbells.

▶ Turn off the gas at the meter or regulator.
▶ Open windows and doors.
▶ Warn your neighbours and leave the building.
▶ Prevent anyone from entering the building. 
▶ Well away from the building: call the National Gas 

Emergency Service on 0800 111 999.

▶ L.P.G. boilers: Call the supplier’s number on the side of the 

gas tank.

Appliance operation:

This appliance can be used by children aged from 8 years and 
above and persons with reduced physical, sensory or mental 
capabilities or lack of experience and knowledge, if they have 
been given supervision or instruction concerning the use of the 
appliance, in a safe way, and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children 
without supervision.

Safety instructions in this document are 
framed and identified by a 
warning triangle which is printed on a grey 
background. 

This symbol indicates important information 
where there is no risk to people or property.

Symbol

Meaning

1.

a numbered step in an action sequence

a step in an action sequence

a reference to a related part in the document or to 
other related documents

  a reference number to identify or refer to a part or 

item

a  list  entry

a list entry (second level)

Table 1

1

Summary of Contents for Greenstar CDi Compact ErP

























Reviews: