11
Control panel
Control panel
All settings are made in the control panel and any alarms can be
viewed in the panel. The control unit is controlled via the panel in
accordance with your requirements.
When the heat pump is combined with the hot water distribution
unit, the control panel and control unit are in the hot water distribu-
tion unit.
Menu dial
Switch
(ON/OFF)
Menu
window
Status LED
Status LED
The control cabinet’s status LED is on the outside of the unit.
LED lights green:
Switch ON/OFF in ON position.
LED fl ashes green:
Switch ON/OFF in OFF position.
LED not lit:
No voltage to control unit.
LED fl ashes red:
An alarm has been triggered and the alarm has not
been acknowledged.
(See section What to do if a fault occurs.)
LED lights red:
A fault has occurred. Contact the installer.
(See
section
What to do if a fault occurs.)
Greensource hot water distribution unit
