Key (accessories)
Greenstar 8000 Style – 6720883869 (2018/05)
10
5
Key (accessories)
5.1
Installing the Key
Installing the Key will enable timer functions (Additional functions
4.6 "Settings in the menu", page 9). For Pairing
Key manual
Always turn off the power to the appliance before installing Key
(accessories).
▶ Plug Key into Key housing.
Fig. 5
Position of Key housing
Fig. 6
Locking mechanism
▶ The lever [2] of the locking mechanism is located right hand side of
the Key housing. Ensure that it is in its Open position before pulling
lever [2] towards front.
▶ Turn on the power.
LED [1] starts blinking green.
▶ Wait until LED is constantly yellow.
Note the display:
▶ Set time and date if necessary.
5.2
Key LED
Key LED status
The LED [1] on the Key displays different states with flashing or constant
colours.
Table 6 LED status
5.3
Setting the time program
Time program
The same method for setting the time program for heating is used to set
the time program for hot water.
▶ Press the
key.
▶ Select and confirm the
Heat. time prog.
or
DHW time prog.
menu.
▶ Select and confirm the
Time program
menu.
The menu items
Mon - Fri
,
Sat - Sun
,
Mon
...
Sun
are displayed.
Possible items to change:
•
Mon - Fri
for change switching times for all weekdays together
•
Mon
...
Sun
to change switching times for individual weekdays
•
Sat - Sun
to change switching times for weekends
▶ Select and confirm item you want to change.
▶ Select and confirm time entry you want to change.
▶ To change the time, press the
or
key.
▶ Press the
key.
The new time is saved. Next time entry is selected.
Add one additional switching time block by sel. Delete an
existing switching time block by selecting
.
0010022807-001
1.
2.
0010023127-001
1
2
Description of the LED displays
Example
Flashing red:
Fault, e.g. no communication between the Key and HMI:
▶ Install the key again, restore the last functioning status.
Flashing yellow:
No fault, user please wait.
Flashing green:
No fault, initialisation process is running.
Constant red:
Temporary fault:
▶ Wait for normal operating condition to be resumed.
Constant yellow:
No fault, time and date not available:
▶ Set the time and date on the appliance.
-or-
▶ Keys with button: Press button on key to start pairing.
Constant green:
No fault, normal operating condition.
LED Off:
No fault, power-saving mode or appliance without power.
