PRODUCT LAY OUT
l
atch button
LED indicator reset button
temper button
English
main unit
magnet
INSTALLATION
1. The two parts of the door / window sensor
should be placed in the right manner such that
when the door / window is closed they are within
10mm from each other.
A
B
3. Include the 2x AAA batteries inside the main unit,
make sure you po and - correctly.
WOOX Home app installation:
1.Download and install the app “WOOX Home“ from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app “WOOX Home“.
3.Create a new account or log in to your existing
account.
4.Tap “+” to add the device.
5.Select the applicable product type from the list of
products.
6.If the status indicator does not flash: Press and hold
the reset button for 6 seconds.
If the status indicator flashes: Confirm in the app.
7.Confirm the Wi-Fi network and password.
8.Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
Support: If you need further help or have comments or
suggestions please visit www.wooxhome.com
2. There are two ways you can install the door /
window sensor on your door or window;
A.
By the four screws which are included in the
package
B.
By the double-sided mounting tape which is
included in the package
Note!
1. The door / window sensor should not be
installed on or near metal framing or other
metal objects since metal objects may
weaken the radio signal strength.
2. The door / window sensor is used for
indoor installation only
3. When using the double-sided tape for
installation please make sure the surface
where you will install the tape is clean to
ensure the best adhesion of the tape.