background image

P440 Rev. 4.2 

 

 

 

http://www.woosim.com

 

2021-12-23 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Operating Precautions 

Please follow the precautions below to enjoy and maintain the full performance of the 

printer. 

 

 Using the Printer   

● 

Be careful not to drop or bump the printer on a hard surface.

 

● 

Do not install the printer in direct sunlight or such areas. 

      Suitable environment for the use of the printer is as follows: 
     

◆ Operating temperature :-10°C to 50°C 

         

◆ Relative humidity   

: 30% to 85% 

 

● 

Do not install the printer near devices that generate strong electromagnetic fields   

such as a copy machine.

 

● 

Do not open the platen cover during printing .

 

● 

Do not remove or reinstall the communication cable during printing or transmission.

 

● 

Do not touch the connectors of the communication during printing.

 

● 

Switch the POWER OFF when not in use. 

● 

Do not other solvent. 

 

 

Thermal Paper Handling 

   

● 

Store the thermal paper in a cool, dry and dark place. 

● 

Do not rub the paper with hard object. 

● 

Do not leave the paper with hard object. 

● 

Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. 

● 

Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. 

● 

Do not use chemical glue. 

 Always use the clean thermal paper. 

 

Summary of Contents for WSP-P440


















Reviews: