Porti-S Rev. 3.0
http://www.woosim.com
18
< M16C, ARM ( NEW ) Version >
Change the mode and option using the MODE Code.
MODE button
: use for changing OPTION status. (
Error Lamp
)
FEED button
: use for changing MODE status. (
Power Lamp
)
[Example] The defaults of the printer are :
RS-232C / 9600 bps / 8 data bit / No parity / 1 stop bit / Density low
/ Mark use / Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high
/ Mark no use / Sensor medium1 / Power down no use
Press
MODE Button
during the
Error Lamp
flicking 5 times.
→
→
→
→
You will see the
Power Lamp
and the
Error Lamp
flickers once.
→
→
→
→
Press the
MODE Button
twice and the
Error Lamp
flickers 3 times.
And then, interface mode has set to
Bluetooth
mode.
When you press
FEED button
once again,
Power Lamp
flickers twice and
the
Error Lamp
flickers once.
→
→
→
→
Press
MODE Button
3 times,
Error Lamp
flickers 4 times.
And then, baudrate has set to
57,600 bps
.
When you
press
FEED Button
once again,
Power Lamp
flickers 3 times
and the
Error Lamp
flickers twice.
→
→
→
→
Press
MODE Button
once,
Error Lamp
flickers once.
And then Data Bit has set to
7 data bit
.
When you press
FEED Button
once again,
Power Lamp
flickers 4 times
and the
Error Lamp
flickers once.
→
→
→
→
Press
MODE Button
once,
Error Lamp
flickers twice.
And then the Parity bit has set to
Odd parity bit
.
When you press
FEED Button
once again,
Power Lamp
flickers 5 times
and
Error Lamp
flickers once.
→
→
→
→
Press
MODE Button
once,
Error Lamp
flickers twice.
And then the density has set to
2 stop bit
.
