CREST - User Manual
13
ENG
2.1.3- Inserting the reserve parachute
Insert the parachute in the harness container with the handle visible to-
wards the outside and with the ropes facing downward.
Position the handle in its specific place and ensure that the Velcro sewn on
the handle attaches to the Velcro on the harness.
Insert a thin rope (such as paraglider line or strimmer cord) into each elas-
tic loop, which you will use to help close the container. Insert the elastic
loops into the smallest of the eyelets under the handle.
Take the bridle cover zip slider and the second zip slider that closes the
other end of the container to their start point under the reserve parachute
handle.
Close the zip on both sides about 20 cm.
Close the external part of the container, taking care while doing so that none
of the zips open. Insert the two plastic yellow pins into the elastic loops and
then under the cover arranged between the two.
