38
7. Maintenance
7.1 Introduction
Periodic cleaning and inspection can help you extend the service life of your slat-belt treadmill along with
preserving its overall appearance. Moreover, this can prevent breakdowns, thereby reducing repair costs.
The following is a guide for regular maintenance and inspection. For treadmills that operate in unusually dirty
environments or treadmills that are subject to particularly intensive usage, the recommended cleaning and
maintenance intervals should be reduced accordingly. We recommend the purchase of a cost-effective service
contract from one of our authorized service agents.
For cleaning purposes, never use sharp-bristled brushes or solvents – these can damage paint and plastic
surfaces. In addition, the entire treadmill should never be doused with liquid – this can damage sensitive
electronic components.
Caution – Possible danger of injury or damage
.
Before cleaning, the treadmill must be switched off and the main power cable must be
unplugged.
7.2 Treadmills in the Medical Market
Weekly:
x
Wipe the handrails, control panel and exterior panels with a damp cloth.
x
Check the power cable for cracks, cuts or exposed wires.
x
Check the general condition of the treadmill.
x
Clean underneath the treadmill belt with a vacuum cleaner.
Î
Note: You can access this area easily by raising the inclination of the belt assembly before switching the
treadmill off and unplugging the power cable.
Every six months:
x
Clean the inside of the treadmill belt assembly with a vacuum cleaner (remove side panels).
x
Verify tightness of all screws.
Retighten any loose fasteners
x
Wipe the slat-belt running surface with a damp cloth.
x
Visual inspection of the drive belt.
Î
If the belt is frayed or if teeth are missing, it must be replaced by one of our authorized service agents or
by the factory.
x
General visual inspection. (In case of anomalies, follow recommendations listed in "Chapter 8 –
Troubleshooting").
x
Lubrication
x
Bearings
Î
All of the treadmill's bearings are permanently lubricated (sealed) and never require further lubrication.
x
Slat-belt running surface
