Operation
44
10/2015-v3.4en
1.
Place the harness on the upper body
from the rear and slide it forward un-
der the shoulders. Please note that the
belt has an upper and lower leg pad.
The harness can be applied while
seated or standing. The chest strap
buckles and two leg strap buckles
should be opened.
2.
Pull the bottom of the inside belt pad-
ding. The
inner padding should not be
in contact with the patient's skin. The
patient should wear a cotton shirt or a
similar piece of clothing.
3.
Pull the other side of the belt padding
tight and fasten with the Velcro.
The belt padding should fit so tightly
that it cannot slide around.
4.
Now close the upper and lower fasten-
ers on the pelvic belt. If necessary, ad-
just the belt length to the body size.
