FORM: EM OWNERS MNUL
REV: 6/4/10
APPR BY: MF
28
Lubrication
Bearings
Almost all of the bearings used in the treadmill are pre-lubricated and do not need to be
greased. On a yearly basis, the four (4) bearings located at the front and rear shaft will
need to be lubricated.
Running Belt
The teeth on the bottom of the running belt are pre-lubricated to aid in reducing noise.
There is no need to lubricate the teeth. If running belt is rubbing against the side of the
drive pulleys, then a small amount of grease (i.e. Molykote or equal) on the edges of the
belt slats will help reduce noise. Apply grease to the teeth on the back drive shaft to
help the belt stay aligned properly.