Manual 37138C
ESDR 4T - Current Differential Protection Relay
Page 24/46
© Woodward
Chapter 6.
Configuration
Introduction
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
When in configuration mode (simultaneous pressing of "Digit
↑
" and "Cursor
→
"), the configuration screen can
be advanced by pressing the "Select" button. A scroll function to rapidly advance through the parameters or in-
creasing values can be enabled by pressing and holding the desired button. If the desired parameter was missed
while advancing through the screens, the user may back up through a maximum of the last four screens by press-
ing the "Select" and "Cursor
→
" buttons. Should there be no entry, parameter change or other action for 60 sec-
onds, the unit will automatically revert into Display mode.
During the configuration mode, the monitoring function is still enabled. This means inevitably, that while adjust-
ing parameters during operation, it is possible to cause a relay to trip.
Basic Data
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
SPRACHE/LANGUAGE
----------------
Language selection
english/german
The screens can be displayed in German or English.
Adjust settings
[Press "select"]
Configuration mode
"Select" button
Pressing the "Select" key activates the configuration mode, and the following pa-
rameters can be enabled or changed within the given limits. Please you note that as
you advance through the configuration screens, by configuring some parameters as
"ON", additional screens must be configured relating to that parameter. If the pa-
rameter is configured as "OFF", the additional screens will be disabled and not dis-
played.
Software version
Software version
Displays the software version.
