Woodward easYgen-3000XT Series, Manual, Page: 812 / 1205

1. ▷
Fig. 315: Modscan32 at address 12491
Copy the complete message of 7 words to address 12491 ff (12490+1) in one step.
This is shown in
╚═▷ Fig. 315 using the ModScan32 software.
Word 0 Word 1 Word 2 Word 3 Word 4 Word 5 Word 6
Delay ON Delay OFF Logic equation 1* Logic equation 2* Command
1 Command
2 Command
3
Sign
1 Op.
1 Sign
2 Op.
2 Sign
3 -/- -/- -/-
0.00 sec 0.00 sec ¾ Or ¾ Or False 00 00 00 No. 09.05
ID =
523 dec
No. 04.14
ID =
252 dec
No. 96.01
ID =
0 dec
0000 (hex) 0000 (hex) 1 2 1 2 3 0 0 0 020B
(hex) 00FC (hex) 0000 (hex)
low
byte high
byte low
byte high
byte "as is" "as is" low
byte high
byte low
byte high
byte low
byte high
byte
0000 (hex) 0000 (hex) 1212 (hex) 3000 (hex) 0B02
(hex) FC00 (hex) 0000 (hex)
Table 124: "Ext. acknowledge" message
6.5.2.3.6 Configuration Of LogicsManager Function "Start w/o load"
The Start w/o load LogicsManager function (parameter ╚═▷ 12540 ) can be configured in a
way that it is always enabled.
Refer to ╚═▷ “6.3.5 Performing Remote Start/Stop And Acknowledgment” for a detailed
configuration of the LogicsManager via HMI or ToolKit.
Example
⚙
812 easYgen-3000XT Series B37574
6 Application Field
6.5.2.3.6 Configuration Of LogicsManager Function "Start w/o load"
Released