Woodward easYgen-3000XT Series, Manual, Page: 807 / 1205

Word 0 Word 1 Word 2 Word 3 Word 4 Word 5 Word 6
3.00 sec 10.00 sec ¾ Or False Or ¾ -/- -/- -/- No. 09.02
ID =
520 dec,
0208 hex
No. 00.08
ID =
7 dec,
0007 hex
No. 04.13
ID =
251 dec,
00FB hex
low
byte high
byte low
byte high
byte Sign
1 Ope‐
rator
1 Sign
2 Ope‐
rator
2 Sign
3 0x00 0x00 0x00 low
byte
high
byte low
byte high
byte low
byte high
byte
2C 01 E8 03 1 2 3 2 1 0 0 0 08 02 07 00 FB 00
Table 121: 7 words Modbus message sample 12120 in detail
The Modbus message for the LogicsManager equation used for description above is
2C01 / E803 / 1232 / 1000 / 0802 / 0700 / FB00 (hex).
6.5.2.3 Configuration Of LogicsManager Functions For Remote Access
6.5.2.3.1 Basic remote control functions
The following chapters describe how to parametrize the LogicsManager via Modbus for
the following basic remote control functions:
• Change to AUTOMATIC mode: 12510 "Operat. mode AUTO" •
• Remote request start/stop: 12120 "Start req. in AUTO" •
• Remote acknowledge: 12490 "Ext. acknowledge" •
• Remote shutdown: 11669 "03.40 Remote Shutdown" •
• Start without load: 12540 "Start w/o load" •
6.5.2.3.2 Configuration of the LogicsManager "Operation mode AUTO"
To fix the operating mode use the LogicsManager function "86.16 LM: Operat. mode
AUTO" (parameter
╚═▷ 12510 ).
The LogicsManager function "Operat. mode AUTO" (parameter ╚═▷ 12510 ) can be
configured in two different ways:
• 1. Automatic operating mode is always enabled •
• 2. Automatic operating mode is enabled via discrete input •
Refer to ╚═▷ “6.3.5 Performing Remote Start/Stop And Acknowledgment” for a detailed
configuration of the LogicsManager via HMI or ToolKit.
807 easYgen-3000XT Series B37574
6 Application Field
6.5.2.3 Configuration Of LogicsManager Functions For Remote Access
Released