2 System Overview
The easYgen is a stand-alone genset controller with measuring,
monitoring, and breaker control functionality. It comes with a easy
mounting plastic housing covering a well tested electronic-electrical
system.
Display and buttons of the HMI offer both access to states and
values, and access to the application. Password protection enables
dedicated operation access levels. Remote control, monitoring, vis‐
ualization, and configuration are possible via integrated interfaces.
Communication between easYgens, with PLC control, or as a net‐
work member offers an enhanced system management range;
additionally supported by easy to implement accessories.
For even higher challenges in genset control the
easYgen series offers further solutions up to the
most complex and ambitious applications.
For dedicated protection tasks ask Woodward for
its protection (relay) solutions.
2.1 Intended Use
The easYgen unit has been designed and constructed solely for
the intended use described in this Operation Manual and--with
even more details-- in the Technical Manual.
n
Intended use requires operation of the control unit within the
written specifications.
n
Intended use includes compliance with all instructions and
safety notes presented in this manual.
n
Any use which exceeds or differs from the intended use shall
be considered improper use.
n
No claims of any kind for damage will be entertained if such
claims result from improper use.
NOTICE!
Damage due to improper use!
Improper use of the remote panel unit may cause
damage to the control unit as well as connected
components.
Improper use includes, but is not limited to:
– Operation outside the specified operation con‐
ditions.
2.2 HMI Status Screens
HMI comes with status screens:
n
Status
n
Engine
n
Gen(erator)
n
Load
n
Mains
General notes
System Overview
HMI Status Screens
37690A
easYgen-1800 | Genset Control
11