ASSEMBLY
-12-
Figure 8.
Attached rubber feet.
Figure 9.
Aligning the fence support.
Figure 10.
Secured locking plate.
To attach the rubber feet, do these steps:
Slide the four rubber feet onto the four corners
of the jointer base (
Figure 8
).
To attach the fence support, do these steps:
1.
Align the fence support with the mounting
holes on the back of the jointer (
Figure 9
).
Make sure the slot on the top of the fence
support is positioned correctly.
2.
Secure the fence support to the jointer with
two 8mm flat washers and two M8-1.25 x 20
cap screws.
3.
Secure the locking plate assembly to the
fence support with the fence sliding handle
(
Figure 10
).
UNPLUG
POWER CORD
before you do any assem-
bly or adjustment tasks!
Otherwise, serious per-
sonal injury to you or oth-
ers may occur!
READ and understand this
entire instruction manual
before performing any
operations with your
machine. Serious personal
injury may occur if safety
and operational informa-
tion is not understood and
followed.
Locking Plate
Rubber Feet
Fence Support
Rubber Feet